Amplificatore integrato, 250
+ 250 W RMS su 8 ohm (500 + 500 W RMS su 4 ohm). Ingressi e uscite bilanciati
XLR e sbilanciati. Bypass. Muting. Inversione di fase. Alimentazione switching.
Display con indicazione digitale del volume. Telecomando.
Continuum
250 Inspired by the rare synthesis of the Model 201 monoblock power amplifier
with the Capri preamplifier and further augmented by the authority of twin
custom banks of bulk output capacitors. The Continuum 250 delivers authority,
neutral extension, and great imaging and staging, combined with the ability to
expose fine sonic detail, harmonic richness, and an inherent capacity to control
speakers ranging from many bipolars up to larger dynamic designs. Continuum 250
is created to the exacting JRDG artistic and engineering standards that turn
advanced green technologies into refined sonic performance. Unsurprisingly,
discerning music lovers throughout the world are choosing this exceptional
integrated amplifier as the centerpiece of sophisticated audio and AV
reproduction systems.Continuum 250 Specifications Output Power @ 8 ohms
Continuous RMS 250 watts, both channels driven Output Power @ 4 ohms Continuous
RMS 500 watts, both channels driven Frequency Response 5 Hz – 60 kHz, -3 dB @ 8
ohms Peak Output Current 35 amps Dynamic Range 117 dBa Load Impedance Range 3
ohms – 16 ohms Input Impedance 48 k ohms THD & Noise, 0.1 watts to Max Output <
0.05%, Typically .006% @ 1kHzv Damping Factor @ 1 kHz > 1000 Gain Structure
Preamplifier Section 14 dB, Amplifier Section 26 dB Volume Control Range 99.5 dB
Volume Control Resolution 0.5 dB +/- 0.05 dB Over Entire Range Common Mode
Rejection Ratio > 85 dB, 20 Hz to 20 kHz Inputs 2 pair Balanced (XLR), 2 pair
Unbalanced (RCA) / 1 pair Unbalanced (RCA), Unity Gain (Bypass) Outputs 1 pair
Balanced (XLR), 1 pair Unbalanced (RCA) / 1 pair CE-Approved Speaker Wire Clamp
Power Consumption Idle – 25 watts, Max – 1000 watts Power Supply Switch Mode (SMPS)
Amplifier Weight 41 lbs / 18.6 kg Amplifier Dimensions (H) x (W) x (D) 5.3" x
15.5” x 15.0” (135mm x 394mm x 380mm)
JEFF ROLAND CONTINUUM
250P
€.9.000,00Per
prezzo
scontato
TELEFONARE/EMAIL Amplificatore integrato CON
INGRESSO PHONO , 250 + 250 W RMS su 8 ohm (500 + 500 W RMS su 4 ohm) con
scheda phono integrata. Ingressi e uscite bilanciati XLR e sbilanciati. Bypass.
Muting. Inversione di fase. Alimentazione switching. Display con indicazione
digitale del volume. Telecomando
Continuum
250 Inspired by the rare synthesis of the Model 201 monoblock power amplifier
with the Capri preamplifier and further augmented by the authority of twin
custom banks of bulk output capacitors. The Continuum 250 delivers authority,
neutral extension, and great imaging and staging, combined with the ability to
expose fine sonic detail, harmonic richness, and an inherent capacity to control
speakers ranging from many bipolars up to larger dynamic designs. Continuum 250
is created to the exacting JRDG artistic and engineering standards that turn
advanced green technologies into refined sonic performance. Unsurprisingly,
discerning music lovers throughout the world are choosing this exceptional
integrated amplifier as the centerpiece of sophisticated audio and AV
reproduction systems.Continuum 250 Specifications Output Power @ 8 ohms
Continuous RMS 250 watts, both channels driven Output Power @ 4 ohms Continuous
RMS 500 watts, both channels driven Frequency Response 5 Hz – 60 kHz, -3 dB @ 8
ohms Peak Output Current 35 amps Dynamic Range 117 dBa Load Impedance Range 3
ohms – 16 ohms Input Impedance 48 k ohms THD & Noise, 0.1 watts to Max Output <
0.05%, Typically .006% @ 1kHzv Damping Factor @ 1 kHz > 1000 Gain Structure
Preamplifier Section 14 dB, Amplifier Section 26 dB Volume Control Range 99.5 dB
Volume Control Resolution 0.5 dB +/- 0.05 dB Over Entire Range Common Mode
Rejection Ratio > 85 dB, 20 Hz to 20 kHz Inputs 2 pair Balanced (XLR), 2 pair
Unbalanced (RCA) / 1 pair Unbalanced (RCA), Unity Gain (Bypass) Outputs 1 pair
Balanced (XLR), 1 pair Unbalanced (RCA) / 1 pair CE-Approved Speaker Wire Clamp
Power Consumption Idle – 25 watts, Max – 1000 watts Power Supply Switch Mode (SMPS)
Amplifier Weight 41 lbs / 18.6 kg Amplifier Dimensions (H) x (W) x (D) 5.3" x
15.5” x 15.0” (135mm x 394mm x 380mm)
Amplificatore integrato, 500 + 500 W RMS su
8 ohm (1.000 + 1.000 W RMS su 4 ohm). Ingressi e uscite bilanciati XLR e
sbilanciati. Bypass. Muting. Inversione di fase. Alimentazione switching.
Display con indicazione digitale del volume. Telecomando.
Continuum 500 Refined by a massive 1500 Watts of pre power supply PFC
rectification, and augmented by the tremendous authority of twin custom banks of
bulk output capacitors. Continuum 500 combines tremendous authority, neutral
extension, great imaging and staging, with the ability to recover minute sonic
detail, an enviable harmonic richness, and an inherent capacity to control
speakers ranging from full-range three ohms electrostatics and bipolars to large
dynamic designs. Continuum 500 is created to the exacting JRDG artistic and
engineering standards that turn advanced green technologies into refined sonic
performance. Unsurprisingly, discerning music lovers will choose this
magnificent integrated powerhouse as the centerpiece of their sophisticated
audio and AV reproduction systems
Continuum 500 Specifications Output Power
@ 8 ohms Continuous RMS 500 watts, both channels driven Output Power @ 4 ohms
Continuous RMS 1000 watts, both channels driven Frequency Response 5 Hz – 45
kHz, -3 dB @ 8 ohms Peak Output Current 40 amps Dynamic Range 120 dBa Load
Impedance Range 3 ohms – 16 ohms Input Impedance 48 k ohms THD & Noise, 0.1
watts to Max Output < 0.1%, Typically .01% @ 1 kHz Damping Factor @ 1 kHz
> 1000 Gain Structure Preamplifier Section 14 dB, Amplifier Section 26 dB Volume
Control Range 99.5 dB Volume Control Resolution 0.5 dB +/- 0.05 dB Over Entire
Range Common Mode Rejection Ratio > 85 dB, 20 Hz to 20 kHz Inputs 2 pair
Balanced (XLR), 2 pair Unbalanced (RCA) / 1 pair Unbalanced (RCA), Unity Gain
(Bypass) Outputs 1 pair Balanced (XLR), 1 pair Unbalanced (RCA) / 1 pair
CE-Approved Speaker Wire Clamp Power Consumption Idle – 60 watts, Max – 2000
watts Power Supply Switch Mode (SMPS) with active power factor correction (PFC)
and universal AC input voltage Amplifier Weight 44 lbs / 20 kg Amplifier
Dimensions (H) x (W) x (D) 5.3" x 15.5” x 15.0” (135mm x 394mm x 380mm)
Amplificatore integrato, 500 + 500 W RMS su 8
ohm (1.000 + 1.000 W RMS su 4 ohm), con scheda phono integrata. Ingressi e
uscite bilanciati XLR e sbilanciati. Bypass. Muting. Inversione di fase.
Alimentazione switching. Display con indicazione digitale del volume.
Telecomando.
Continuum 500 Refined by a massive 1500 Watts of pre power supply PFC
rectification, and augmented by the tremendous authority of twin custom banks of
bulk output capacitors. Continuum 500 combines tremendous authority, neutral
extension, great imaging and staging, with the ability to recover minute sonic
detail, an enviable harmonic richness, and an inherent capacity to control
speakers ranging from full-range three ohms electrostatics and bipolars to large
dynamic designs. Continuum 500 is created to the exacting JRDG artistic and
engineering standards that turn advanced green technologies into refined sonic
performance. Unsurprisingly, discerning music lovers will choose this
magnificent integrated powerhouse as the centerpiece of their sophisticated
audio and AV reproduction systems
Continuum 500 Specifications Output Power
@ 8 ohms Continuous RMS 500 watts, both channels driven Output Power @ 4 ohms
Continuous RMS 1000 watts, both channels driven Frequency Response 5 Hz – 45
kHz, -3 dB @ 8 ohms Peak Output Current 40 amps Dynamic Range 120 dBa Load
Impedance Range 3 ohms – 16 ohms Input Impedance 48 k ohms THD & Noise, 0.1
watts to Max Output < 0.1%, Typically .01% @ 1 kHz Damping Factor @ 1 kHz
> 1000 Gain Structure Preamplifier Section 14 dB, Amplifier Section 26 dB Volume
Control Range 99.5 dB Volume Control Resolution 0.5 dB +/- 0.05 dB Over Entire
Range Common Mode Rejection Ratio > 85 dB, 20 Hz to 20 kHz Inputs 2 pair
Balanced (XLR), 2 pair Unbalanced (RCA) / 1 pair Unbalanced (RCA), Unity Gain
(Bypass) Outputs 1 pair Balanced (XLR), 1 pair Unbalanced (RCA) / 1 pair
CE-Approved Speaker Wire Clamp Power Consumption Idle – 60 watts, Max – 2000
watts Power Supply Switch Mode (SMPS) with active power factor correction (PFC)
and universal AC input voltage Amplifier Weight 44 lbs / 20 kg Amplifier
Dimensions (H) x (W) x (D) 5.3" x 15.5” x 15.0” (135mm x 394mm x 380mm)
PREAMPLIFICATORI
JEFF ROLAND
CAPRI €. 3.000,00Per prezzo
scontato
TELEFONARE/EMAIL
Preamplificatore stereo con ingressi ad alto livello. Ingressi e
uscite bilanciati XLR e sbilanciati. Bypass per impiego A/V. Muting. Inversione
di fase. Volume con encoder ottico. Display con indicazione digitale del volume.
Alimentazione switching. Telecomando.
Finitura: Silver+ 300,00 euro
The Jeff Rowland Design Capri is an exceptionally balanced preamplifier. From
its sweet and extended treble, through its textured midrange, and down to its
pitched, tuneful and deep bass, it delivers a broad and neutral frequency
extension. Capri laces authority, dynamics, and transparent resolution with rich
harmonics—rarely found in any preamplifier.The stylish Capri is at home in any
superior audio reproduction systems, ranging from space efficient setups for
modern living areas to sprawling component configurations in large listening
environments. Music lovers are choosing Capri over “cost-no-object”
preamplifiers, regardless of underlying technology, because this world class
preamplifier, created to exacting JRDG standards, delivers years of refined
musical enjoyment at a real world price. Overall Gain14 dB Gain Range 99.5 dB,
199 Equal Increments Gain Resolution 0.5 dB, +/-0.03 dB Over Entire Range
Frequency Response 10 Hz - 350 kHz, -3 dB Maximum Input Level 7 volts RMS at 0
dB Gain Maximum Output Level 7 volts RMS THD + Noise Less than 0.001% , 7 volt
output, 20-20kHz. Signal-to-Noise Ratio Greater than 100 dB Output Noise Level
10 Microvolts, Unweighted, 20 Hz to 20 kHz Bandwidth, 0 dB Gain Common Mode
Rejection Ratio >85dB, 20 Hz 20 kHz Input Impedance 48K Ohms Balanced or
Unbalanced Channel Separation >105 dB, 20 Hz to 20 kHz Inputs
2 x Pair Balanced XLR, 1 x Pair Unbalanced (RCA) Unity Gain (Bypass), 2 x Pair
Unbalanced RCA Outputs 1 x Pair Balanced Line Level, 1 x Pair
Unbalanced Line Level Power Consumption 6 Watts Weight 9.5 lbs / 4.26 kg
Dimensions 2.6”(H) x 13.7” (W) x 6.2” (D) / 6.7 cm (H)x 35 cm (W) x 15.7 cm (D)
JEFF ROLAND
CAPRI P €.
3.500,00
Per prezzo
scontato
TELEFONARE/EMAIL Preamplificatore stereo. Stadio Phono
integrato MM/MC. Ingressi e uscite bilanciati XLR e sbilanciati. Bypass per
impiego A/V. Muting. Inversione di fase. Volume con encoder ottico. Display con
indicazione digitale del volume. Alimentazione switching. Telecomando
Finitura: Silver+ 300,00 euro
The Jeff Rowland Design Capri is an exceptionally balanced preamplifier. From
its sweet and extended treble, through its textured midrange, and down to its
pitched, tuneful and deep bass, it delivers a broad and neutral frequency
extension. Capri laces authority, dynamics, and transparent resolution with rich
harmonics—rarely found in any preamplifier.The stylish Capri is at home in any
superior audio reproduction systems, ranging from space efficient setups for
modern living areas to sprawling component configurations in large listening
environments. Music lovers are choosing Capri over “cost-no-object”
preamplifiers, regardless of underlying technology, because this world class
preamplifier, created to exacting JRDG standards, delivers years of refined
musical enjoyment at a real world price. Overall Gain14 dB Gain Range 99.5 dB,
199 Equal Increments Gain Resolution 0.5 dB, +/-0.03 dB Over Entire Range
Frequency Response 10 Hz - 350 kHz, -3 dB Maximum Input Level 7 volts RMS at 0
dB Gain Maximum Output Level 7 volts RMS THD + Noise Less than 0.001% , 7 volt
output, 20-20kHz. Signal-to-Noise Ratio Greater than 100 dB Output Noise Level
10 Microvolts, Unweighted, 20 Hz to 20 kHz Bandwidth, 0 dB Gain Common Mode
Rejection Ratio >85dB, 20 Hz 20 kHz Input Impedance 48K Ohms Balanced or
Unbalanced Channel Separation >105 dB, 20 Hz to 20 kHz Inputs
2 x Pair Balanced XLR, 1 x Pair Unbalanced (RCA) Unity Gain (Bypass), 2 x Pair
Unbalanced RCA Outputs 1 x Pair Balanced Line Level, 1 x Pair
Unbalanced Line Level Power Consumption 6 Watts Weight 9.5 lbs / 4.26 kg
Dimensions 2.6”(H) x 13.7” (W) x 6.2” (D) / 6.7 cm (H)x 35 cm (W) x 15.7 cm (D)
JEFF ROLAND
CORUS €.15.000,00
Per prezzo
scontato
TELEFONARE/EMAIL Preamplificatore stereo con ingressi ad alto
livello. Costruzione in due telai con stadio di alimentazione separato.
Circuitazione a simmetria complementare totalmente bilanciata. Impiego di
condensatori ceramici. Display fluorescente grafico a matrice 320 x 32. Circuiti
stampati di grado militare con substrato ceramico. Tutti gli ingressi e le
uscite sono accoppiati con trasformatori Lundahl, per la massima reiezione ai
disturbi. 4 Ingressi bilanciati XLR e 2 sbilanciati RCA. 2 Uscite XLR e 2 RCA.
Bypass per applicazioni HT. Telecomando in alluminio.
Corus Preamplifier The Corus Stereo Preamplifier delivers the Jeff Rowland
hallmark of a sensuous and grain free musicality, combined with astonishing
transparency and low level resolution. A broad 3-dimensional sound stage
materializes into the physical listening space, where instruments and vocalists
assume the textured appearance of solid existence. The preamplifier yields
exceptional frequency extension and linearity, with magnificent bass definition,
an extraordinarily complex exposure of harmonic structure, and a sweetly
filigreed treble. The Corus yields amazingly nuanced low level detail and
micro-dynamics, and outperforms every previous Rowland preamplifier with its
transient speed, staggering authority, and breath-taking macro dynamics. Only
the transcendent resolving musicality of the Criterion battery-powered
Preamplifier ever yields an even superior listening experience. ~Overall Gain
Independently Programmable 0 to 20 dB on each input Gain Range 99.5 dB, 199
Equal Increments Gain Resolution 0.5 dB, +/- 0.03 dB Over Entire Range Frequency
Response 10 Hz – 300 kHz, -3 dB @ 8 ohms Maximum Input Level 13.5 volts (RMS) @
0 dB Gain Maximum Output Level 13.5 volts (RMS) THD + Noise < .003% @ 2 volt (RMS)
Output, 50 Hz – 20 kHz Signal-to-Noise Ratio > 100 dB Common Mode Rejection
Ratio > 90 dB, 20 Hz – 20 kHz Channel Separation 99.5 dB Input Impedance 40k
ohms Balanced or Unbalanced Output Impedance 60 ohms Balanced or Unbalanced
Inputs 4 pair Balanced (XLR), 2 pair Unbalanced (RCA) Outputs 2 pair Balanced (XLR),
2 pair Unbalanced (RCA) for Main Out, 1 pair Balanced (XLR), 1 pair Unbalanced
(RCA) for Record Out Power Consumption 15 watts Power Supply Universal Voltage
Input Power Factor Corrected Power Supply Display 320 x 32 dot Vacuum
Fluorescent Display (VFD) Preamplifier Weight 22 lbs / 10 kg Preamplifier
Dimensions H/W/D 3.9” x 15.5” x 12.3” (99mm x 394mm x 311mm) Power Supply
Dimensions H/W/D 3.9” x 4.7” x 11” (99mm x 119mm x 279mm)
JEFF ROLAND
CRITERION
€.23.000,00Per
prezzo
scontato
TELEFONARE/EMAIL Preamplificatore stereo con ingressi ad alto
livello. Costruzione in due telai con stadio di alimentazione separato
selezionabile AC o batterie. Circuitazione a simmetria complementare totalmente
bilanciata. Ingressi e uscite bilanciate XLR e sbilanciate RCA. Display
fluorescente VFD. Telecomando.
Criterion
Technology The Criterion's sensuous musicality, sonic excellence, and trend
setting usability features are products of a sophisticated architecture that
pushes the limits of today’s technological art. The preamplifier’s elegant
topology is completely balanced in the input phases, in circuit, and output
phases. The Criterion features a twin chassis mechanical package milled from
ingots of premium aircraft-grade aluminum, ground-breaking dual AC/battery power
management, fully isolated transformer-coupled balanced and single-ended inputs
and outputs, military-grade 4-layer ceramic boards, incredibly low noise and
high gain differentially balanced OPA1632 audio amplifier modules at its core.
The Criterion reference preamplifier stands at the intersection of paradigmatic
innovations within the Jeff Rowland tradition of uncompromising engineering,
green technologies, impeccable craftsmanship, and personal expression—exacting
JRDG artistic and technological standards that turn innovations into heirlooms
Overall Gain Independently Programmable 0 to 20 dB on each input Gain Range
99.5 dB, 199 Equal Increments Gain Resolution 0.5 dB, +/- 0.03 dB Over Entire
Range Frequency Response 10 Hz – 300 kHz, -3 dB @ 8 ohms Maximum Input Level
13.5 volts (RMS) @ 0 dB Gain Maximum Output Level 13.5 volts (RMS) THD + Noise <
.003% @ 2 volt (RMS) Output, 50 Hz – 20 kHz Signal-to-Noise Ratio > 100 dB
Common Mode Rejection Ratio > 90 dB, 20 Hz – 20 kHz Channel Separation 99.5 dB
Input Impedance 40k ohms Balanced or Unbalanced Output Impedance 60 ohms
Balanced or Unbalanced Inputs 4 pair Balanced (XLR), 2 pair Unbalanced (RCA)
Outputs 2 pair Balanced (XLR), 2 pair Unbalanced (RCA) for Main Out, 1 pair
Balanced (XLR), 1 pair Unbalanced (RCA) for Record Out Power Consumption Min –
15 watts, Max – 50 watts depending on Battery Recharge Rate Power Supply
Universal Voltage Input Power Supply with selectable Off-line NiMh Battery Power
Supply and Charger Display 320 x 32 dot Vacuum Fluorescent Display (VFD)
Preamplifier Weight 46 lbs / 21 kg Overall Dimensions (H) x (W) x (D) 6.4” x
15.5” x 12.3” (162mm x 394mm x 311mm
Finale di potenza
stereo da 100 W + 100W RMS su 8 ohm (200 W RMS/4 ohm). Ingressi bilanciati XLR
(Sbilanciati RCA tramite adattatore). Trigger 12V. Chassis interamente in
alluminio.Finitura: NERO
Model
102 Stereo The Model 102 stereo power amplifier delivers Jeff Rowland’s classic
musicality in a simple 10 pound package that matches the sophisticated style of
the Capri preamplifier. Model 102 captures the elusive musical experience with
unmitigated grace. It delivers a linear frequency extension that ranges from a
pitched bass to a textured treble, with rippling harmonics, surprising
authority, nuanced resolution, and the effortless musicality of a true Rowland.
Housed in an elegant and compact chassis milled from aircraft-grade Aluminum
ingots, this stereo power amplifier has been created to exacting JRDG standards
It will deliver years of refined musical enjoyment at a real world price.Model
102 Specifications Output Power Continuous RMS / @ 8 ohms - 100 watts / @ 4
ohms - 200 watts Input Impedance 40k Ohms Frequency Response 5 Hz -
65kHz, 3dB Common Mode Rejection Ratio >85 dB, 20 Hz 20 kHz Peak Output Current
> 11 amps Absolute Phase Non-inverting, Pin 2 Positive Dynamic Range 110
dba Outputs 1 Pair CE-Approved Binding Posts CCIF Intermod. Dist., 14/15kHz <
.0005% 10 W 4 ohms Power Consumption Idle - 10 watts / Maximum - 500 watts
Damping Factor @ 1 kHz 1000 Amplifier Weight 7.4 lbs/3.4 kg. Overall Gain
27 dB Amplifier Dimensions 2.7"(H) x 13.7"(W) x 7.5"(D) / 68.5mm(H) x 34.8cm(W)
x 19cm(D)
Finale di potenza
stereo da 100 W + 100W RMS su 8 ohm (200 W RMS/4 ohm). Ingressi bilanciati XLR
(Sbilanciati RCA tramite adattatore). Trigger 12V. Chassis interamente in
alluminio. Finitura: Silver Model
102 Stereo The Model 102 stereo power amplifier delivers Jeff Rowland’s classic
musicality in a simple 10 pound package that matches the sophisticated style of
the Capri preamplifier. Model 102 captures the elusive musical experience with
unmitigated grace. It delivers a linear frequency extension that ranges from a
pitched bass to a textured treble, with rippling harmonics, surprising
authority, nuanced resolution, and the effortless musicality of a true Rowland.
Housed in an elegant and compact chassis milled from aircraft-grade Aluminum
ingots, this stereo power amplifier has been created to exacting JRDG standards
It will deliver years of refined musical enjoyment at a real world price.Model
102 Specifications Output Power Continuous RMS / @ 8 ohms - 100 watts / @ 4
ohms - 200 watts Input Impedance 40k Ohms Frequency Response 5 Hz -
65kHz, 3dB Common Mode Rejection Ratio >85 dB, 20 Hz 20 kHz Peak Output Current
> 11 amps Absolute Phase Non-inverting, Pin 2 Positive Dynamic Range 110
dba Outputs 1 Pair CE-Approved Binding Posts CCIF Intermod. Dist., 14/15kHz <
.0005% 10 W 4 ohms Power Consumption Idle - 10 watts / Maximum - 500 watts
Damping Factor @ 1 kHz 1000 Amplifier Weight 7.4 lbs/3.4 kg. Overall Gain
27 dB Amplifier Dimensions 2.7"(H) x 13.7"(W) x 7.5"(D) / 68.5mm(H) x 34.8cm(W)
x 19cm(D)
Finale di potenza
stereo da 300 W + 300W RMS su 8 ohm (550 W RMS/4 ohm). Classe A/B con 12
transistor per canale. Ingressi bilanciati XLR (Sbilanciati RCA tramite
adattatore) accoppiati tramite trasformatore Lundahl. Alimentazione switching
con circuito PFC. Trigger 12V. Chassis interamente in alluminio estratto dal
pieno.
Model
625 Stereo Precision machined from a single block of non-resonant aircraft-grade
aluminum, the Model 625 features a unique composite circuit architecture
incorporating separate Class AB voltage and current gain blocks with no overall
negative feedback and virtually free of internal and external EMI field
contamination and mechanical vibration. The Model 625 delivers a sensuous
grain-free musicality of unparalleled transparency and low level resolution that
blossoms from a rich velvety silence and blossoms into the pure enjoyment of
your listening experience.Model 625 Specifications Output Power 300 watts @ 8
ohms / 550 watts @ 4 ohms Frequency Response 5 Hz – 350 kHz S/N Ratio 95 dB, ref.
1.0 watt @ 8 ohm load Output Noise <55 µv, 20 Hz – 20 kHz, unweighted Crosstalk
>91 dB @ 1 kHz, 74 dB @ 20 kHz Input Impedance 10k ohms THD + Noise 0.005% @ 1
kHz, 8 ohms Damping Factor >200, 20 Hz - 20 kHz Overall Gain / Bal. or Unbal. 27
dB Common Mode Rejection Ratio >90 dB, 20 Hz – 20 kHz Absolute Phase
Non-inverting Pin 2 Positive Inputs 1 pair balanced (XLR) Outputs 2 pair
parallel binding posts per channel Power Consumption Idle 100 watts Power
Consumption Standby 1 watt Amplifier Weight 54 lbs. / 24.5 kg Amplifier Shipping
Weight 64 lbs. / 29 kg Amplifier Dimensions (h/w/d) 5.75” x 15.5” x 16.25” /
146mm x 394 mm x 413mm
Finale di potenza
stereo da 300 + 300W RMS su 8 ohm, 2 Ingressi bilanciati o sbilanciati, 2 uscite
in parallelo con possibilità di bi-wiring. Costruzione interna ad "H"
non-risonante.
Finale di potenza
stereo da 500 + 500W RMS su 8 ohm, 2 Ingressi bilanciati o sbilanciati, 2 uscite
in parallelo con possibilità di bi-wiring. Costruzione interna ad "H"
non-risonante.
Finale di potenza mono da
250W RMS su 8 ohm, 500W RMS su 4 ohm, 1 Ingresso bilanciato o sbilanciato
tramite adattatore opzionale, 1 uscita. Costruzione interna ad "H"
non-risonante.
Model
201 Mono Jeff Rowland imaging, staging, and musicality in a beautifully crafted
monoblock chassis capable of capturing the often elusive music and theater
experience with grace and authority. Model 201 delivers a compelling musical
experience with a linear frequency extension that ranges from a deep pitched
bass to a textured treble, with rippling harmonics and nuanced low level
resolution. This work of art, in both sight and sound, is a true Rowland. Housed
in an elegant and compact chassis milled from aircraft-grade Aluminum ingots,
the Model 201 monoblock power amplifier has been created to exacting JRDG
artistic and engineering standards. The advanced green technology that delivers
its refined performance, make the Model 201 monoblock power amplifier ideal for
the most sophisticated stereo and multi-channel audio systems at a real world
price. Output Power Continuous RMS @ 8 ohms - 250 watts / @ 4 ohms - 500 watts
Frequency Response 5 Hz - 70kHz, 3dB Peak Output Current > 35 amps Dynamic Range
117 dba Load Impedance Range 2 ohms - 16 ohms THD + Noise 0.1W-500W/4 ohm <.05%,
typically .006 @ 1kHz CCIF Intermod. Dist., 19/20kHz <.002% Damping Factor @ 1
kHz 1000 Overall Gain Selectable Internal Jumper, 26 or 32 dB Input Impedance
40k Ohms Common Mode Rejection Ratio >90dB, 20 Hz 20 kHz Absolute Phase
Non-inverting, Pin 2 Positiv Inputs 1 x Balanced XLR (Unbalanced operation
requires an optional XLR to RCA adapter) Outputs 1 Pair CE-Approved Binding
Posts Power Consumption Idle - 9 watts Maximum - 650 watts Amplifier Weight 13
lbs/6 kg. Amplifier Dimensions 2.6" x 8.4" x 11.5"
Finale di potenza mono da 400W RMS su 8
ohm, 1 Ingresso bilanciato o sbilanciato, 2 uscite con possibilità di
collegamento serie o parallelo. Costruzione interna ad "H" non-risonante.
Model 301 Mono With its configurable ability to drive low and high impedance
speakers alike with a perfect combination of finesse and control, the Model 301
delivers the true Rowland character. Musical authority and dynamics with a
superb frequency extension deliver sound to a vast three-dimensional stage. The
resolving power to recover the finest sonic details and exceptional transparency
is complemented with a complex exposure of the music’s harmonic structure, and
the sweet texture of the treble. Rather than taking the easy way out, and giving
the Model 301, a deceptively pleasing colored patina of euphonic warmth, Jeff
Rowland has chosen a way less travelled, and has instilled in this amplifier, an
agile, sensuous, and neutral musicality. This reference level instrument for
music reproduction is created to the exacting Rowland artistic and engineering
standards that have consistently turned technological innovation into heirlooms.
Unsurprisingly, music lovers the world over choose the Model 301 monoblock power
amplifier over “cost-no-object” amplifiers, regardless of their underlying
technology.Model 301 Specifications Output Power @ 8 ohms Continuous RMS
1800/600 watts (ser/par) Output Power @ 4 ohms Continuous RMS NA/1200 watts (ser/par)
Frequency Response 10 Hz - 60 kHz, 3dB Peak Output Current > 90 amps Dynamic
Range 120 dba THD + Noise, 0.1W-500W/4 ohm typ. .006% @ 1kHz CCIF Intermod. Dist.,
19/20kHz < .002% Damping Factor 60 Common Mode Rejection Ratio >90dB, 20 Hz 20
kHz Amplifier Weight 80 lbs each Amplifier Dimensions 10.6" x 15.5" x 18.3"
Finale di potenza a 6 canali da 250W RMS x
6 su 8ohm (500W x 6 su 4ohm). Possibilità di configurare l'uscita a 2,3,4,5 e 6
canali sia per bi o tri-amplificazione che AV. Ingressi bilanciati XLR e
sbilanciati RCA, 6 uscite di potenza separate.
Finale di potenza a 4 canali da 250W RMS su
8 ohm x 4, 4 Ingressi bilanciati o sbilanciati, 4 uscite di potenza separate.
Costruzione interna ad "H" non-risonante.
.jpg){kind=small}
.jpg){kind=small}
.jpg){kind=small}
Continuum
250 Inspired by the rare synthesis of the Model 201 monoblock power amplifier
with the Capri preamplifier and further augmented by the authority of twin
custom banks of bulk output capacitors. The Continuum 250 delivers authority,
neutral extension, and great imaging and staging, combined with the ability to
expose fine sonic detail, harmonic richness, and an inherent capacity to control
speakers ranging from many bipolars up to larger dynamic designs. Continuum 250
is created to the exacting JRDG artistic and engineering standards that turn
advanced green technologies into refined sonic performance. Unsurprisingly,
discerning music lovers throughout the world are choosing this exceptional
integrated amplifier as the centerpiece of sophisticated audio and AV
reproduction systems.Continuum 250 Specifications Output Power @ 8 ohms
Continuous RMS 250 watts, both channels driven Output Power @ 4 ohms Continuous
RMS 500 watts, both channels driven Frequency Response 5 Hz – 60 kHz, -3 dB @ 8
ohms Peak Output Current 35 amps Dynamic Range 117 dBa Load Impedance Range 3
ohms – 16 ohms Input Impedance 48 k ohms THD & Noise, 0.1 watts to Max Output <
0.05%, Typically .006% @ 1kHzv Damping Factor @ 1 kHz > 1000 Gain Structure
Preamplifier Section 14 dB, Amplifier Section 26 dB Volume Control Range 99.5 dB
Volume Control Resolution 0.5 dB +/- 0.05 dB Over Entire Range Common Mode
Rejection Ratio > 85 dB, 20 Hz to 20 kHz Inputs 2 pair Balanced (XLR), 2 pair
Unbalanced (RCA) / 1 pair Unbalanced (RCA), Unity Gain (Bypass) Outputs 1 pair
Balanced (XLR), 1 pair Unbalanced (RCA) / 1 pair CE-Approved Speaker Wire Clamp
Power Consumption Idle – 25 watts, Max – 1000 watts Power Supply Switch Mode (SMPS)
Amplifier Weight 41 lbs / 18.6 kg Amplifier Dimensions (H) x (W) x (D) 5.3" x
15.5” x 15.0” (135mm x 394mm x 380mm)